Concreters Melbourne Trust for Driveways, Slabs & Exposed Aggregate

Straight, level, properly-cured concrete — driveways, patios, slabs and paths across Melbourne. Free on-site quote, no obligation.

exposed aggregate concrete driveway in Melbourne

Our Services

Whatever the pour, we match you with concreters who do it every week.

Concreting Built for Melbourne's West

Werribee, Point Cook, Tarneit and the surrounding growth corridor sit largely on reactive clay — classified Class M to Class H under AS 2870. This ground swells when wet and shrinks when it dries, moving the soil beneath a driveway or slab through the seasons. It’s the single biggest reason concrete cracks out here, and it’s why prep matters more in the west than almost anywhere in Melbourne.

On new estate lots the ground has usually been compacted by the building trades before the driveway goes in, so the sub-base needs checking rather than assuming. We build for the conditions: a compacted crushed-rock sub-base, reinforcement held at the correct height on bar chairs, adequate slab thickness, control joints placed to let the concrete move, and the right falls so water runs off rather than pooling against the slab. Get those right and the finish — whatever you choose — lasts.

How We Pour Concrete That Lasts

1. On-site assessment.

We measure the job, check the site access and ground, and give you a fixed price — not a phone guess.

2. Excavation & sub-base.

We excavate to the right depth and lay a compacted crushed-rock base. On reactive clay this step is what stops future movement.

3. Formwork & reinforcement.

Boxing set to the correct falls, then steel mesh or bar held up on bar chairs so it sits in the slab, not on the dirt.

4. Pour & finish.

The right mix and slump for the weather, poured, screeded and finished in your chosen surface — plain, exposed aggregate, coloured or decorative.

5. Curing & sealing.

Proper curing for strength, and sealing where the finish needs it. Walk-on in 24–48 hours, vehicle-ready around 7 days, full strength at 28.

Why Choose Us

On-site quotes, not phone guesses

We measure the job before we price it, so the number doesn’t move on the day.

Built for reactive clay

Most failed concrete is failed base. In Melbourne’s west that means building for reactive clay — proper compaction, correct steel height, adequate thickness and the right falls — so the slab handles seasonal ground movement instead of cracking through it.

We handle the council crossover

A new driveway that meets the road needs a council-approved crossover before it’s poured. We sort the consent and build it to council spec as part of the job, so you’re not chasing paperwork yourself.

Client Testimonials

"They did our driveway and did a fantastic job with the whole thing — sorted out all the details and the quote easily, no fuss. Couldn't be happier."

Sasha C - Werribee

"They concreted our poolside area and I loved how smooth the finish came out. Fast, clean, and barely a hiccup the whole way through."

Raymond -Narre warren

""They did our patio and I was impressed by how seriously they took safety on site, and the quality of the tradesmen. Proper professionals.""

Tim - Brighton

Service Areas

We pour across Melbourne. Popular areas:

Werribee · Point Cook · Tarneit · Truganina · Hoppers Crossing · Truganina and More

FAQ

How much does a concrete driveway cost in Melbourne?

It depends on size, finish and site access. Plain concrete sits at the lower end, while exposed aggregate and decorative finishes cost more. We’ve broken down concrete driveway costs per square metre in Melbourne in detail, or book a free on-site quote for a fixed price on your job.”

How long before I can drive on new concrete?

Concrete is usually walk-on ready in 24–48 hours and safe for vehicle traffic after about 7 days, reaching full strength around 28 days. Cold or wet weather slows curing.

Do I need a permit for a driveway or crossover?

A new vehicle crossover onto the road usually needs council approval; a driveway on your own property often doesn’t. We can point you to your council’s requirements before we start.

What's the difference between plain and exposed aggregate concrete?

Exposed aggregate reveals the stone in the mix for a textured, non-slip, higher-end look — it costs more but adds kerb appeal and grip.

Do you handle removal of the old driveway?

Yes – we take care of the full job, including breaking up and removing your existing driveway before we pour the new one. That covers demolition, hauling away the old concrete, and prepping the base so the new slab goes down on solid, properly compacted ground. We’ll confirm whether removal is included in your quote or priced separately when we come out to measure, so there are no surprises on the day.